Firmware Change/Update SAMSUNG G920F Galaxy S6

Firmware Change/Update in SAMSUNG G920F Galaxy S6

  1. Firstly, download Odin 3.10.7 and extract it.
  2. Download stock firmware from or Sammobile and extract it to odin folder.
  3. Connect your device to computer via micro USB cable.
  4. Turn the device in Download Mode.
  5. Then open Odin in Administrator Mode.Odin in Administrator Mode
  6. After that, you should check that you have installed Samsung drivers. If you have installed you will see ID:COM field highlited and also in log Added. Odin Samsung drivers
  7. Make sure you have selected Auto Reboot and Factory Reset Time options.Reboot and Factory Reset
  8. Upload images: BL, AP, CP and CSC.Upload images   
  9. Note! If you got only one file upload it as AP file.
  10. Check everything again, and press START.START Upload  
  11. Warning! After start you should not disconnect the device from your computer. 
  12. Your device is updating now, be patient it can take a while.
  13. Your device has been updated. Now, you can disconnect device from computer.Upload Success