How to remove Google account protection in Alcatel OT-4034X PIXI 4?

How to bypass Google Account protection? How to remove factory reset protection? How to active your phone in case you forgot the Google password? How to bypass FRP?

Necessary Tools and Drivers

  1. USB Drivers
  2. Alcatel Mobile Update Tool
  3. SP Flash Tool
  4. Scatter file download

Install Necessary Tools

  1. Start by installing Alcatel Mobile Update Tool
  2. Install USB Drivers
  3. Unpack SP Flash Tool

WARNING!
Changing firmware in the phone will erase all of your data.
All described operations you are doing at your own risk.
If want to save your data do a backup before start.

Removing Google Account by USB cable

To prevent from accidental killing your phone is always good to do full rom backup before beginning this tutorial with SP Flash Tool.

  1. Turn on SP Flash Tool with admin rights.spflash with admin right run
  2. Download scatter file for  phone, copy to SP Flash Tool directory, then select scatter file for your phone from SP Flash Tool directory with proper tab.spflash scatter selecting
  3. Change tab from download to format.spflash change to format tabspflash change to format tab arrow
  4. Select manual format, check validation.spflash format tabspflash format tab manual format and validiation select
  5. In region filed leave the "EMMC_USER"
  6. In Begin Address field write 0x9000000 for   your phonespflash format tab start adress select
  7. In Format Lenght field write 0x800000 for  your phonespflash format tab how long format
  8. Now press Start button.spflash format tab start button
  9. Next Connect turned off   phone to usb cable without touching any buttons.
  10. Google Account remove process will start and after few seconds should end with Format OK message.frp remove starting on 4034x alcatelfrp removed from alcatel 4034x
  11. The phone is now without Google Account protection and can be used without any problems. Now you can disconnect usb cable from phone.
  12. Next turn on the phone to recovery mode and do wipe data/factory reset and wipe cache. 
  13. Reboot phone to normal mode and close SP Flash Tool software, The End. 

Congratulations FRP (Factory Reset Protection) is removed / erased.

By Wojtek Góralczyk on Nov 16, 2017