How remove Google Account protection / Factory Reset protection in Doogee Shoot 2?

How to bypass Google Account protection? How to remove factory reset protection? How to active your phone when you forgot the Google password? How to bypass FRP?

Necessary Tools and Drivers

  1. USB Drivers
  2. SP Flash Tool
  3. Scatter file download

Install Necessary Tools

  1. Unpack SP Flash Tool.
  2. Install USB Drivers depend on system use 32bit or 64bit installer.

WARNING!
Removing Google Account on the phone will erase all of your data.
All described operations you are doing at your own risk.
If want saves your data do a backup before start.

Removing Google Account by USB cable

To not mess up the phone by mistake very good is do full rom backup before starting this tutorial with SP Flash Tool.

  1. Turn on SP Flash Tool with admin rights.spflash tool turn on
  2. Download scatter file for Doogee Shoot 2, unpack and copy to SP Flash Tool directory, then select scatter file for your phone from SP Flash Tool directory with the proper tab.spflash tool scatter select
  3. Change tab from download to format.spflash tool format tab selectspflash tool format tab opened
  4. Select manual format, check validation.spflash tool format tab manual format selectedspflash tool format tab validation selected
  5. In region filed leave the "EMMC_USER"
  6. In Begin Address fieldwrite 0x4fa0000for Doogee Shoot 2 phonespflash tool format tab start adress
  7. In Format Lenght field write 0x100000 for Doogee Shoot 2 phonespflash tool format tab end adress
  8. Now press Start button.spflash tool format tab process button
  9. Next Connect turned off Doogee Shoot 2 phone to usb cable without touch any buttons.
  10. Google Account remove process will start and after few seconds end with success, software inform about this with success screen.spflash tool format tab frp removingspflash tool format tab frp / google verification removed
  11. The phone is without Google Account protection and can use it without problems, disconnect usb cable from phone.
  12. Next turn on the phone and do a factory reset from the menu.
  13. Close SP Flash Tool software, The End.

Congratulations FRP (Factory Reset Protection) is removed / erased.

By Wojtek Góralczyk on Dec 8, 2017