How Update / Change / Repair Firmware in Doogee Shoot 2?

Necessary Tools and Drivers

  1. USB Drivers
  2. SP Flash Tool
  3. Firmware Download

Install Necessary Tools

  1. Unpack SP Flash Tool.
  2. Install USB Drivers depend on system use 32bit or 64bit installer.
  3. Unpack downloaded firmware

WARNING!
Removing Google Account on the phone will erase all of your data.
All described operations you are doing at your own risk.
If want saves your data do a backup before start.

Firmware Update / Change / Repair Doogee Shoot 2

  1. Turn on SP Flash Tool software with admin rights.SP Flash Tool with admin rights
  2. Select scatter file from firmware unpacked directory.SP Flash Tool scatter select
  3. Select Download only and press Download button.

    SP Flash Tool Download option selected

    SP Flash Tool download button pressed

  4. Connect turned off the phone to usb cable without touch any keys.
  5. Firmware update process should start.

    SP Flash Tool flash button pressed

    SP Flash Tool flashing start

  6. Just wait 5-10 minutes until you see success screen then just disconnect the phone from cable and close SP Flash Tool software.

    SP Flash Tool flashing continue

    SP Flash Tool flashing still

    SP Flash Tool flashing success
  7. That all. Congratulation you changed/ updated/repaired your Doogee Shoot 2.

The problem occurred when flashing solution:
If you got any problem with the flash phone just change in point 3 Download only to Format all + Download option and rest do like is written above.

SP Flash Tool Format all + Download option selected

By Wojtek Góralczyk on Dec 14, 2017