24 Aug 2018

How to bypass Google Account verification in myPhone Hammer Energy?

Necessary Tools and Drivers

  1. myPhone Drivers
  2. SP Flash Tool
  3. Scatter file download

Install Necessary Tools

  1. Install USB Drivers
  2. Unpack SP Flash Tool v5.1524.00.000
    • Windows 10 users should additionally go to c:\Windows\inf and search for the file "wpdmtp.inf" press right button on it and select INSTALL

Removing Google Account on the phone will erase all of your data.
All described operations you are doing at your own risk.
If want saves your data do a backup before start.
The battery should be at least 50% charged before the start.

Removing Google Account by using a USB cable

When you're ready you can follow this tutorial.

  1. Turn on SP Flash Tool with admin rights. spflash tool start with admin rights
  2. Download scatter file for your myPhone Hammer Energy, copy to SP Flash Tool directory, then select scatter file for your phone from SP Flash Tool directory choosing proper tab. spflash myphone scatter file select
  3. Change tab from download to format. spflash myphone arrow to format tab spflash myphone hammer energy format tab
  4. Select manual format Flash, and tick a validation box. spflash myphone manual format mode spflash myphone validation checked
  5. In region filed leave the "EMMC_USER"
  6. In Begin Address field write 0x6A00000 spflash myphone hammer energy start address
  7. In Format Lenght field write 0x100000 spflash myphone hammer energy format length
  8. Now press the Start button. spflash myphone start button format process start
  9. Next Connect turned off the phone to USB cable, don't press any buttons.
  10. Google Account remove process will start and after a few seconds you will get success screen. spflash myphone process start spflash myphone process success
  11. Your phone is now Google Account protection free and you can use it with no problems. You can now disconnect USB cable from phone.
  12. Next turn on the phone into recovery mode and do wipe data/factory reset and wipe cache.
  13. Reboot phone to normal mode and close SP Flash Tool software, The End.

Congratulations FRP (Factory Reset Protection) is removed / erased.

By Wojtek Góralczyk on 24 Aug 2018

If you found this helpful, click on the Google Star, Like it on Facebook or follow us on Twitter and Instagram

rating star rating star rating star rating star rating star
No rating