How bypass Google Account Verification in ZTE Blade A602 with Android 7.x?

Necessary Tools and Drivers

  1. ZTE Drivers
  2. SP Flash Tool
  3. Scatter file download

Install Necessary Tools

  1. Install ZTE USB Drivers for your windows(32bit or 64bit).
  2. Unpack SP Flash Tool v5.1524.00.000 version.

WARNING!
Removing Google Account on the phone will erase all of your data.
All described operations you are doing at your own risk.
If want saves your data do a backup before start.
The battery should be at least 50% charged before the start.

Removing Google Account by using the USB cable

When you're ready you can follow this tutorial.

  1. Turn on SP Flash Tool with admin rights.spflash tool start with admin rights
  2. Download scatter file for your phone, copy to SP Flash Tool directory, then select scatter file for your phone from SP Flash Tool directory choosing proper tab.spflash zte blade a602 scatter file select
  3. Change tab from download to format.spflash zte blade a602 scatter file selectedspflash zte blade a602 scatter file selected arrow to format tab
  4. Select manual format Flash, and tick a validation box.spflash zte blade a602 manual format modespflash zte blade a602 manual format mode
  5. In region filed leave the "EMMC_USER".
  6. In the Begin Address field write 0x6A80000 for your phone.spflash zte blade a602 start address
  7. In Format Lenght field write 0x00100000 for your phone.spflash zte blade a602 format length
  8. Now press the Start button.spflash zte blade a602 process started
  9. Next Connect turned off the phone to USB cabledon't press any buttons(on some Blade A520 need hold Volume Down button when connecting USB cable).
  10. Google Account remove process will start and after a few seconds you will get success screen.spflash myphone process frp process goingspflash zte blade a602 process success
  11. Your phone is now Google Account protection free and you can use it with no problems. You can now disconnect USB cable from phone.
  12. Next turn on the phone into recovery mode and do wipe data/factory reset and wipe cache.
  13. Reboot phone to normal mode and close SP Flash Tool software, The End.

Congratulations FRP (Factory Reset Protection) is removed / erased.

By Wojtek Góralczyk on Aug 24, 2018