How remove Google Account Protection/ Factory Reset Protection in Alcatel OT-5045X PIXI 4(5)?

How to bypass Google Account protection? How to remove factory reset protection? How to active your phone when you forgot the Google password? How to bypass FRP?

Necessary Tools and Drivers

  1. USB Drivers
  2. Alcatel Mobile Update Tool
  3. SP Flash Tool
  4. Scatter file download

Install Necessary Tools

  1. Start by installing Alcatel Mobile Update Tool
  2. Install USB Drivers
  3. Unpack SP Flash Tool

WARNING!
Removing Google Account in the phone will erase all of your data.
All described operations you are doing at your own risk.
If want saves your data do a backup before start.

Removing Google Account by USB cable

Before you start using SP Flash Tool I recommend doing full rom backup as if something goes wrong you may lose your personal data.

When you're ready you can follow this tutorial.

  1. Turn on SP Flash Tool with admin rights.spflash with admin right run
  2. Download scatter file for phone, copy to SP Flash Tool directory, then select scatterfile for your phone from SP Flash Tool directory choosing proper tab.spflash scatter selecting
  3. Change tab from download to format.spflash change to format tabspflash change to format tab arrow
  4. Select manual format Flash, and tick a validation box.spflash format tabspflash format tab manual format and validiation select
  5. In region filed leave the "EMMC_USER"
  6. In Begin Address field write 0xa000000for your phonespflash format tab start adress select
  7. In Format Lenght field write 0x800000 for your phonespflash format tab how long format
  8. Now press Start button.spflash format tab start button
  9. Next Connect turned off phone to usb cable, dont press any buttons.
  10. Google Account remove process will start and after few seconds end with success, after all the success screen will pop out.spflash tool frp process startspflash tool frp process success
  11. Your phone is now Google Account protection free and you can use it with no problems. You can disconnect usb cable from phone.
  12. Next turn on the phone into recovery mode and do wipe data/factory resetand wipe cache.
  13. Reboot phone to normal mode and close SP Flash Tool software, The End.

Congratulations FRP (Factory Reset Protection) is removed / erased.

By Wojtek Góralczyk on Nov 30, 2017