How to configure port forwarding for PlayStation 5 on ARRIS WR2100. Port Forward all the necessarry ports on ARRIS WR2100 for PlayStation 5.
How to setup PlayStation 5 port forwarding on ARRIS WR2100?
- At first, open Settings on your PlayStation 5 console.
- Click on the Network.
- Select Connection Status and pick View Connection Status.
- Write down IP Address, MAC Address, Subnet Mask, DNS and Default Gateway.
- Now open ARRIS WR2100 admin panel, if you don't know how, check how to Open Admin Page ARRIS WR2100.
- Move to More Functions.
- From the list pick Network Settings, select LAN and scroll down the page.
- Click on Add button.
- Enter IP address which must be different than the DHCP IP address range and MAC address that you write down from PS5 Settings.
- Press the OK key to save all settings.
- Go Back to PS5, and choose Settings, Network, and Settings.
- Then move to the Set up Internet Connection and choose the network that you want to use.
- Select Advanced Settings and change IP Address Settings from Automatic to Manual.
- Pick IPv4 Address and set IP that you enter in your router and press Done.
- Next, choose Subnet Mask, type it and confirm with the Done key.
- Do the same with your Default Gateway and click Done.
- Confirm all steps by pressing the OK button.
- Wait for a while and you should see the Connected subtitle next to the network that you choose earlier.
- Now move to ARRIS WR2100 settings, choose More Functions once more and press on Secuirty Settings.
- Pick NAT Services and click on Add key.
- Enter the Service name, Host IP address and pick the Device name.
- From the Protocol list choose TCP/UDP. (If you can't add both options, then add TCP and UDP ports separately Protocol TCP: 1935,3478-3480, Protocol UDP: 3074,3478-3479.)
- Add to Internal port: 1935 and then enter External port: 1935.
- In the end, press Save.
- Great work! With all the ports properly forwarded you should have a better connection between PlayStation 5 and ARRIS WR2100.
