Port Forward for Xbox One on iBall Baton iB-WRB150N

How to configure port forwarding for Xbox One on iBall Baton iB-WRB150N. Port Forward all the necessarry ports on iBall Baton iB-WRB150N for Xbox One.

How to setup Xbox One port forwarding on iBall Baton iB-WRB150N?

1. At first, start your Xbox One.
2. Then press on the Settings and from the list choose Network.   
3. Select Advanced settings. 
4. Note down the IP address, Subnet Mask and Gateway of your console. 
5. Open iBall Baton iB-WRB150N admin panel, if you don't know how, check how to Open Admin Page iBall Baton iB-WRB150N.
6. Press on More Functions. 
7. Pick Network Settings, select LAN and scroll down the page.     
8. Click on Add key. 
9. Enter the IP address and MAC address that you write down from Xbox One console.   
10. Press the OK button.   
11. Move back and again click on More Functions. 
12. Now select Security Settings and then NAT Services.   
13. Press on Add button.
14. Enter the Service name, Device name and Host IP address.     
15. From the Protocol list choose TCP/UDP.        
16. Add to Internal port: 1935 and then enter External port: 1935 and press Save key.    
17. Press on Add button once more.
18. Enter the Service name, Device name and Host IP address.   
19. From the Protocol list choose UDP.   
20. Add to Internal port: 88 and then enter External port: 88. 
21. Finally, press the Save button.
22. Repeat steps 17, 18, 19, 20 and 21 for ports: 500, 3544, 4500.
23. Perfect job! With all the ports properly forwarded you should have a better connection between Xbox One and iBall Baton iB-WRB150N.