ハードリセット WITHINGS ScanWatch 42mm

工場出荷時のリセット方法 WITHINGS ScanWatch 42mm? WITHINGS ScanWatch 42mmすべてのデータをに消去する方法は? WITHINGS ScanWatch 42mm画面ロックをバイパスする方法しますか? WITHINGS ScanWatch 42mmの既定値を復元する方法

次のチュートリアルでは、マスター リセット WITHINGS ScanWatch 42mm のすべての方法を示します。ハードウェア キーと Android設定でを達成する方法をチェックしてください。その結果、 WITHINGS ScanWatch 42mm が新しいものになり、コアの実行速度が速くなります

  1. In the beginning, go to the Settings on your phone, select Bluetooth and locate the WITHINGS ScanWatch 42mm watch on the list of devices. WITHINGS ScanWatch 42mm Bluetooth settings
  2. After that on the Cog icon next to the watch name. WITHINGS ScanWatch 42mm Settings icon
  3. Then select the option called Forget. WITHINGS ScanWatch 42mm Forget
  4. Next, confirm by pressing on Forget Device. WITHINGS ScanWatch 42mm Forget device
  5. Now press and hold the Side button on your watch for 10 seconds. WITHINGS ScanWatch 42mm Side button
  6. You should see the Factory reset on the display. WITHINGS ScanWatch 42mm Factory reset
  7. Then press and hold the Side button for 3 seconds. WITHINGS ScanWatch 42mm Press side button
  8. Now the "Reset in 5 clicks" should appear on the screen. WITHINGS ScanWatch 42mm Reset in 5 clicks
  9. Afterward, press the Side button 5 times (the display will count down from 5 to 1 with each press). WITHINGS ScanWatch 42mm Press side button 5 times
  10. After a few seconds, the watch will show "Hello"
  11. Amazing work! Now you can try connecting your WITHINGS ScanWatch 42mm with your phone.

rating star rating star rating star rating star rating star
評価なし
WARNING !
Hard Reset will erase all of your data.
All described operations you are doing at your own risk.
助けて!これは機能しません。