硬重置 BARTEC PIXAVI Gravity X

如何恢复出厂设置 BARTEC PIXAVIGravity X?如何擦除BARTEC PIXAVI Gravity X中的所有数据?如何绕过BARTEC PIXAVIGravity X中的屏幕锁定?如何在BARTEC PIXAVI Gravity X中恢复默认值

以下教程显示了主重置BARTEC PIXAVI Gravity X的所有方法。了解如何通过硬件键和Android 7.1.2 Nougat设置完成硬重置。结果,你的BARTEC PIXAVIGravity X将是新的,而ni1的核心将运行得更快。

  1. In the beginning, you need to turn off your device. To do so press and hold the Power button, then tap the Power Off option on the screen.
    BARTEC PIXAVI Gravity X Power button BARTEC PIXAVI Gravity X Power off
  2. After the device turns off, press and hold the Volume Up button + Power button at the same time. BARTEC PIXAVI Gravity X Volume Down + Power button
  3. When the BARTEC PIXAVI logo appears on the screen you can release both buttons.
  4. When the "No command" screen appears, hold the Power button, then press the Volume Up button. BARTEC PIXAVI Gravity X No command
  5. You should see the Recovery Menu on the screen. Use the Volume Up button and Volume Down button to move through the menu.
    BARTEC PIXAVI Gravity X Recovery BARTEC PIXAVI Gravity X Volume Up + Volume Down
  6. Then scroll down to Wipe data/Factory data reset and press the Power button to confirm. BARTEC PIXAVI Gravity X Recovery wipe data/factory data reset
  7. Now move down and highlight Yes, then press the Power button to confirm. BARTEC PIXAVI Gravity X Recovery yes
  8. Afterward, select the Reboot system now and press the Power button to continue. BARTEC PIXAVI Gravity X Recovery reboot system now
  9. Wait until the "Welcome" screen appears. BARTEC PIXAVI Gravity X Welcome screen
  10. Marvelous job!

rating star rating star rating star rating star rating star
无评分

WARNING !
Hard Reset will erase all of your data.
All described operations you are doing at your own risk.
帮我!这行不通。