硬重置 KRUGER & MATZ Flow 6

如何恢复出厂设置 KRUGER & MATZFlow 6?如何擦除KRUGER & MATZ Flow 6中的所有数据?如何绕过KRUGER & MATZFlow 6中的屏幕锁定?如何在KRUGER & MATZ Flow 6中恢复默认值

以下教程显示了主重置KRUGER & MATZ Flow 6的所有方法。了解如何通过硬件键和Android 8.1 Oreo设置完成硬重置。结果,你的KRUGER & MATZFlow 6将是新的,而ni1的MediaTek MT6739核心将运行得更快。

First method:

  1. Start by pressing the Power button for a few moments. 为KRUGER & MATZ Flow 6主复位
  2. Wait until your device shuts down and press the Volume up button with the Power button at the same time. 在KRUGER & MATZ Flow 6删除数据
  3. Release them after the Boot mode shows up. 为KRUGER & MATZ Flow 6格式化
  4. Now in order to navigate you need to use the Volume up key and Volume down to confirm your choice. Choose the Recovery mode 恢复KRUGER & MATZ Flow 6
  5. When the Android robot pops up keep pressing Power button and press Volume up once. 在KRUGER & MATZ Flow 6删除数据
  6. In the next step find "Wipe data/factory reset" using Volume keys and after that press Power button. 删除KRUGER & MATZ Flow 6上的屏幕密码
  7. Select "yes" and use Power key to confirm your decision. 从KRUGER & MATZ Flow 6永久删除数据 \
  8. In the end, choose "Reboot system now" 移除KRUGER & MATZ Flow 6上的屏幕锁
  9. Congratulations! Now, wait for the welcome panel.
  10. All the data was erased from your device, so you need to set up all settings again.

rating star rating star rating star rating star rating star
无评分

Articles

WARNING !
Hard Reset will erase all of your data.
All described operations you are doing at your own risk.
帮我!这行不通。