硬重置 SAMSUNG Galaxy Watch4 40mm

如何恢复出厂设置 SAMSUNGGalaxy Watch4 40mm？如何擦除SAMSUNG Galaxy Watch4 40mm中的所有数据？如何绕过SAMSUNGGalaxy Watch4 40mm中的屏幕锁定？如何在SAMSUNG Galaxy Watch4 40mm中恢复默认值？

以下教程显示了主重置SAMSUNG Galaxy Watch4 40mm的所有方法。了解如何通过硬件键和Wear OS 3.0设置完成硬重置。结果，你的SAMSUNGGalaxy Watch4 40mm将是新的，而ni1的Exynos W920核心将运行得更快。

如何硬重置 SAMSUNG Galaxy Watch4 40mm

Warning! Before you attempt to Hard Reset your device make sure that the battery level on your SAMSUNG Galaxy Watch4 40mm is at least 50%. If not charge your device before you continue.

Start by pressing and holding the Back button and Home button together.
Keep holding both buttons until you see "Rebooting" at the bottom of the screen, then quickly release both buttons and press the Home button three times.
You should enter Boot Mode.
You can scroll through the menu by pressing the Home button repeatedly.
Now select the Recovery option, then press and hold the Home button until your watch reboots.
Your watch should restart and after few seconds it should boot into Recovery Mode.
Now press the Back button repeatedly to scroll down through the menu and select the Wipe data/factory reset option.
After you select Wipe data/factory reset, press the Home button to confirm.
Now press the Back button to scroll down and select Factory data reset.
Then, press the Home button to confirm.
Wait until the wiping process is complete.
Then, select Reboot system now and press the Home button to confirm.
Your SAMSUNG Galaxy Watch4 40mm watch should start resetting.
Wait until the resetting process is complete.
Great work! Be aware that performing a hard reset will remove all data and settings from your device.