硬重置 WALTON Primo NF4

如何恢复出厂设置 WALTONPrimo NF4?如何擦除WALTON Primo NF4中的所有数据?如何绕过WALTONPrimo NF4中的屏幕锁定?如何在WALTON Primo NF4中恢复默认值

以下教程显示了主重置WALTON Primo NF4的所有方法。了解如何通过硬件键和Android 8.1 Go Edition设置完成硬重置。结果,你的WALTONPrimo NF4将是新的,而ni1的MediaTek MT6739WA核心将运行得更快。

  1. Start by turning your phone off. To do so press and hold the Power button, then tap the Power Off option on the screen.
    WALTON Primo NF4 Power button WALTON Primo NF4 Power off
  2. Wait until the device turns off, then press and hold the Power button + Volume down button. When the WALTON logo appears on the screen you can release both buttons. WALTON Primo NF4 Volume Down + Power button
  3. When the "No command" appears on the screen, hold the Power button and press the Volume Up button to continue. WALTON Primo NF4 No command
  4. You should see the Recovery Menu on the screen now. Use the Volume buttons to navigate through the menu. WALTON Primo NF4 Recovery
  5. Then move down and highlight Wipe data/Factory data reset, then press the Power button to continue. WALTON Primo NF4 Recovery wipe data/factory data reset
  6. Afterward, scroll down to Yes and press the Power button to confirm. WALTON Primo NF4 Recovery yes
  7. After the process is done, select the Reboot system now and press the Power button to continue. WALTON Primo NF4 Recovery reboot system now
  8. Now your device will restart and after a while, the "Welcome" screen should appear. WALTON Primo NF4 Welcome screen
  9. Excellent work! The hard reset is complete! Remember that this operation will remove all of your data from the device.

rating star rating star rating star rating star rating star
无评分

Articles

WARNING !
Hard Reset will erase all of your data.
All described operations you are doing at your own risk.
帮我!这行不通。